Nixxes is Sony's second studio purchase in a week.

轉發合作企業徵才訊息:

磐儀科技 RD 職缺一覽 21.05.29
1. Android Firmware or Embedded 資深軟體工程師
工作內容：
1. Linux Kernel 與驅動程式的開發與移植
2. 系統效能優化與問題排除
3. Android BSP 開發
4. rootfs porting
5. 其他主管交辦事項
職務需求：
1. 熟悉 MTK or Rockchip 平台開發者為佳
2. 具 Android BSP／Framework 開發經驗
2. BIOS 工程師/高級工程師
工作內容
1. 專案的 BIOS 研發及維護
2. 應用程式或測試工具的撰寫及維護
3. 替客戶解決問題
4. 完成主管交代任務
職務需求：
1. 具 Legacy / UEFI BIOS 開發經驗者佳
2. 熟悉 Windows 等作業系統及電腦架構
3. 溝通協調、應變表達與學習力強
4. 配合度高、細心負責且抗壓性高
5. 具獨立作業能力者佳
磐儀科技 招募聯繫
劉先生
e-mail address: jeffliu@arbor.com.tw
磐儀科技職缺網址：
https://www.104.com.tw/company/12syxbco?jobsource=cs_2018indexpoc#info06香港商磐旭智能

RD 職缺一覽 21.05.29
1.AI Embedded & MCU Firmware Engineer
工作內容：
1. MCU/AI Chip Firmware 開發
2.AI 學習, 影像辨識
3.電源管理
4.OpenCV porting
職務需求：
1.有 FreeRTOS 開發經驗為佳
2.熟悉 C/C++
3.熟悉 yolov3 & opencv 為佳
4.熟悉 YOCTO Linux 為佳
2. Android Driver/Embeded Linux (ARM 架構) Firmware Engineer
工作內容
1. Android BSP 開發
2.系統效能優化與問題排除
職務需求：
1. Familiar with C++/Java
2. 熟悉 MTK 平台開發者為佳
3. Familiar with Android HAL
4.電子,電機,資訊相關系所
3. EE 硬體工程師
工作內容
1.系統整合電路設計
2.Schematic Design/Layout review
3.電路零件選用及 BOM 建立
4.基板除錯電路 Debug
5.電子訊號, 電源量測和功能驗證
6.熟悉 ORCAD 線路圖繪製、PADS 或 Allegro PCB layout 工具、CAM350 工具
7.專案管理、產品開發及量產經驗
8.文件撰寫能力
職務需求：
1. 大學以上電子電機相關系所畢2.具電子硬體電路設計及相關驗證 debug 知識
3.具 PCB layout 相關知識
4.應用過『聯發科的晶片 IC』或『高通的晶片 IC
香港商磐旭智能 招募聯繫
葉先生
e-mail address: alexyeh@amobile.com.tw
香港商磐旭智能職缺網址：

https://www.104.com.tw/company/1a2x6bk3m2?jobsource=cs_2018indexpoc

【Market Commentary】Despite multiple billions in investment here and there, the global chip shortage has yet to be mitigated, at least in the short term.

Although this shortage can be eased on a technical level by either design-porting from 200mm to 300mm or device-scaling from mature nodes to advanced nodes, it’s impossible to account for all possible product designs and device solutions.

With regards to Moore’s Law, the PPA (power, performance, and area) model works well for the mainstream logic ICs and commodity memory.

On the other hand, the industry still needs legacy devices to sustain the best spot of product reliability in power and signal integrity, especially in specialty IC segments.

Berminat nak tanya pasal WISECO & PORTING BOLEH TERUS CALL/WHATTSAP -
0177774571 - Nasty Portflow

RLT STUDIO
???????
https://www.youtube.com/channel/UChLB_Bb6Y0rxRFfprlDArBA

PRODUCT TERKINI NT-10, MINYAK HITAM 1.1LITER, KHAS UNTUK RS150R, NAK BELI SILA KLIK SINI - https://www.nt10malaysia.com/index.ph...

INSTAGRAM BOB YP - https://www.instagram.com/bob_yp/?hl=en

INSTAGRAM DIN SOYA - https://www.instagram.com/din.soya/?h...

Nak beli sticker/baju/cap melalui COD/POS. Boleh beli dengan DIN SOYA - +60126459097

Tour Taiwan with me: http://taiwantoursm13.com/

Private Channel: https://www.patreon.com/M13

My Facebook: https://www.facebook.com/Mordeth13

Support M13 buy my Private Series: http://www.m13online.com/?page_id=294

World's best motorcycle pants are RHOK (search Ebay for them) Made my Hello Kitty quicker.

Nokitthecat: Its good to have top quality synthetic mix oil for two stokes.
AmsOil http://ww2.amsoil.com/shop/by-product/motor-oil/2-stroke/interceptor-2-cycle-oil/
The high grade oil in important to reduce coking, soot, carbon, varnish and contaminants that will stick rings and accelerate two stroke cylinder wear.
If the cylinder has been honed, take it easy during break in to keep heat from building up and seizing engine.
Sustained high RPM and high speed with wind friction will load the engine thus make allot of heat in the cylinder and piston and may seize or score piston and cylinder.
Short bursts of acceleration then city cruising is good.
The short bursts will put pressure on the rings and help them seat well but not generate too much heat.
With the added performance they might have ported the intake ports or they might have serviced the centrifugal clutch.
You can get performance by changing the weights and springs in the centrifugal clutch and by porting the intake and exhaust.
A larger expansion chamber on the exhaust pipe will help tune the power RPM band.
Upgrading the reeds (just past the carburetor) is an easy way of picking up low end power as well.
There are many ways of making extra power.