你即將離開本站
1. To start the scanning process, you need to stand in the center of the room, no further than 16 feet (5 meters) away from a wall. You can activate Room Scanner on your device via “Import > Scan Room in AR” in the Menu. 2. Now, begin scanning walls, starting with the nearest one. Move the device slowly to detect the wall surface.
You will notice that identified surfaces are automatically classified as a Wall, Floor, Ceiling, Door or Window.
Try to scan as much of the wall surface as possible, but it may be sufficient to scan a small part of a wall to get the result. 3. Some parts of scanned surfaces may appear slightly pivoted, compared to the original wall; therefore, it is recommended to remove them from the Room Scanner consideration.
To do this, you need to first select such a surface on the screen. When it becomes highlighted in green, you can delete the pivoted area from the Room Scanner consideration by tapping on the trash can icon on the right part of the screen.
Also, when working with the Room Scanner, one can mistakenly select the wrong surface. In this case, just tap on the selected surface again. The selection will move cyclically along the ...
