你即將離開本站

並前往https://community.nxp.com/t5/i-MX-Processors/Enabling-JTAG-for-i-MX8MQ/m-p/1222791/highlight/true

Re: Enabling JTAG for i.MX8MQ - NXP Community

... debugger suggestion I use BDI3000 and PEEDI and both works fine on ARMv8. ... sudo openocd -f interface/jlink.cfg -f board/nxp_mcimx8m-evk.cfg [cloned ...

確定！ 回上一頁

查詢 「OpenOCD ARMv8」的人也找了：

  1. OpenOCD ARMv8
    2.
  2. OpenOCD STM32F103
    3.
  3. OpenOCD <--> Telnet
    4.
  4. OpenOCD reset
    5.
  5. Openocd Linux
    6.
  6. OpenOCD manual
    7.
  7. Reset_config srst_only
    8.